DCC Control Product List

The following table includes a complete list of the RailCon DCC product range.

RailCon DCC control products allow you to easily add central control to your layout.

You can cotrol points, siganals and a wide range of other track and track side accessories using RailCon products.

DCC Control Points Products

Product Details

Part # Image Details Price Buy
SD-001

Central Control Unit

Connects to the DCC system via the track to decode accessory commands and activate personality modules contains eight outputs for controlling up to eight accessory items.

For more detailed information click here.

For a downloadable pdf data sheet (34 kb) click here.

To connect the SD-001 to a slave module a four core cable is required. For details click here.

$24.85

SD-002

Solenoid Points Control Slave Module

The SD-002 module is used in conjunction with an SD-001 central control unit to control solenoid actuated points. The SD-002 has two outputs for switching two sets of points.

An SD-001 and four SD-002 modules can control the operation of eight sets of points.

For more detailed information click here.

For a downloadable pdf data sheet (34 kb) click here.

$19.40

SD-003

2 Aspect Signal Slave Module

The SD-003 slave module is used with an SD-001 central control module to control signals fitted with two LED lights.

It has two outputs for controlling two, two aspect signal eg red/yellow or red/green.

The module powers the signal lights directlyand a series resistor is not required.

One SD-001 and four SD-003 modules can drive eight two light signals.

For more detailed information click here.

For a downloadable pdf data sheet (34 kb) click here.

$7.60

SD-004

3 Aspect Signal Slave Module

The SD-004 slave module is used with an SD-001 central control module to control signals fitted with three LED lights.

It has one output for controlling one three aspect signal eg red/yellow/green.

The module powers the signal lights directly and a series resistor is not required.

One SD-001 and four SD-004 modules can drive four three light signals.

For more detailed information click here.

For a downloadable pdf data sheet (34 kb) click here.

$15.45

SD-005

Points/Signal Slave Module

This slave module operates one, two aspect signal and one solenoid actuated set of points. It is used where a signal and a set of points are worked together.

The module requires the installation of an SD-001 central control module to drive it. One SD-001 and four SD-005 modules can control four two light signals and four sets of points.

For more detailed information click here.

For a downloadable pdf data sheet (34 kb) click here.

$14.90

SD-006

Turntable Slave Module

The Sd-006 slave module is used for driving a motorised bi-directional turntable.

The SD-006 is a fully solid state design, it does not uses relays or switches and therefore provides reliable poeation.

An SD-001 central control unit is required to drive the SD-006 slave module.

For more detailed information click here.

For a downloadable pdf data sheet (34 kb) click here.

$12.65

SD-007

Relay Slave Module

The SD-007 slave module has relay outputs that can be used for driving any line side accessory that needs to be turned on and off. Accessories such as street or building lights.

The module has two high capacity relays and can control two accessory items independently.

An SD-001 central control unit is required to operate the SD-007 relay slave module.

For more detailed information click here.

For a downloadable pdf data sheet (34 kb) click here.

$11.20

SD-008

Slow Motion Points Slave Module

THe SD-008 is used for driving points fitted with a slow motion (Tortoise) style switching machine. The module is fully solid state wigth no relays or switches which makes it very reliable.

An SD-001 central control unit is required to the SD-008. Four SD-008 slave modules can be connected to one SD-001 and each SD-008 can independently operate two motors so up to eight sets of points can be controlled by one SD-001 and four SD-008 units.

For more detailed information click here.

For a downloadable pdf data sheet (34 kb)

click here.

$21.20

SD-009

Servo Motor Slave Module

The SD-009 slave module is used in conjunction with an SD-001 central control unit for operating points and semaphore signals fitted with a servo motor.

It has two outputs to drive two points or signals. The stroke is easily ajusted to get the right movement of the points or signal arm.

One SD-001 and four SD-009 modules can operate eight sets of points or eight signals.

For more detailed information click here.

For a downloadable pdf data sheet (34 kb) click here.

$24.60

All prices are in Australian dollars and include GST

Packing and delivery charged at cost

Payment when using the shopping cart will be via PayPal.

Direct deposit can be arranged for Australian customers - email your enquiry to us: The Computer Crew

Trade enquiries welcome

Top   Home Page   Back

If you are using Internet Explorer and do not have javascript enabled the Back button may not work. You can either enable javascript or use the browser Back button to return to the previous page.