Model Railway Track Control

For ease of operation of your model railway layout controlling the points from a central point or control panel is really an essential element. A far better system than leaning over the layout to 'flick' points by hand.

RailCon track control products allow you to easily add central points control to your layout.

As well as cotrolling points other track control products such as level crossing control and track isolation is possible by using RailCon products.

Conventional Control

The RailCon manual track control product range includes:

Scroll down or click here for conventional control products.

DCC Control

If your layout has DCC control you can operate your points using your DCC system and RailCon DCC products. These include:

Scroll down or click here for DCC control products.

Conventional Control Points Products

Product Details

Part # Image Details Price Buy
MD-001

Manual Points Control Unit

This module provides manual switching of solenoid actuated points. The module is controlled by the use of a single pole double throw (SPDT) toggle switch. The switch can be arranged so that its operating lever indicates which way the points are set.

To protect the point solenoids the unit has an acurate resistor/capacitor timed pulse. A capacitor discharge device is not required.

For more detailed information click here.

For a downloadable pdf data sheet (17 kb) click here.

$14.50

MD-003

Servo Motor Control Unit

For manually driving points or semaphore signals fitted with a servo motor. The unit can drive two servo motors.

Actuation is by the use of single pole double throw (SPDT) toggle switches. The swiches can be mounted so that the position of the switch toggle lever can indicate the position of the points or signal.

For more detailed information click here.

For a downloadable pdf data sheet (66 kb) click here.

$24.60

MD-005

Station Control

The MD-005 Station Control module provides signalling for through stations on your model railway. It controls both a home and a starter signal.

In operation when a train passes the home signal it is changed from the normally green setting to red. At the same time an optional isolated track section at the exit to the station is de-energised.

When the train is to leave the station the layout operator presses a button which sets the starter signal to green and energises the optional isolated track section to allow the train to leave.

As the train passes the starter signal it sets the starter signal to red and the home signal to green ready for the next train to arrive.

For more detailed information click here.

For a downloadable pdf data sheet (55 kb) click here.

$35.50

LC-001

Level Crossing Lights Controller

The LC-001 level crossing control module controls flashing level crossing lights for your model railway track system.

The module allows for double or single track level crossings and can detect trains running in either direction.

The LC-001 is designed to work with crossing lights that have Light Emitting Diode (LED) lamps fitted. It also provides the voltage required for operation of the LEDs in the crossing lights.

For more detailed information click here.

For a downloadable pdf data sheet (53 kb) click here.

$52.25

All prices are in Australian dollars and include GST

Packing and delivery charged at cost

Payment when using the shopping cart will be via PayPal.

Direct deposit can be arranged for Australian customers - email your enquiry to us: The Computer Crew

Trade enquiries welcome

Top   Home Page   Back

If you are using Internet Explorer and do not have javascript enabled the Back button may not work. You can either enable javascript or use the browser Back button to return to the previous page.
DCC Control Points Products

Product Details

Part # Image Details Price Buy
SD-001

Central Control Unit

Connects to the DCC system via the track to decode accessory commands and activate personality modules contains eight outputs for controlling up to eight accessory items.

For more detailed information click here.

For a downloadable pdf data sheet (47 kb) click here.

To connect the SD-001 to a slave module a four core cable is required. For details click here.

$24.85

SD-002

Solenoid Points Control Slave Module

The SD-002 module is used in conjunction with an SD-001 central control unit to control solenoid actuated points. The SD-002 has two outputs for switching two sets of points.

An SD-001 and four SD-002 modules can control the operation of eight sets of points.

For more detailed information click here.

For a downloadable pdf data sheet (47 kb) click here.

$19.40

SD-005

Points/Signal Slave Module

This slave module operates one, two aspect signal and one solenoid actuated set of points. It is used where a signal and a set of points are worked together.

The module requires the installation of an SD-001 central control module to drive it. One SD-001 and four SD-005 modules can control four two light signals and four sets of points.

For more detailed information click here.

For a downloadable pdf data sheet (48 kb) click here.

$14.90

SD-008

Slow Motion Points Slave Module

THe SD-008 is used for driving points fitted with a slow motion (Tortoise) style switching machine. The module is fully solid state wigth no relays or switches which makes it very reliable.

An SD-001 central control unit is required to the SD-008. Four SD-008 slave modules can be connected to one SD-001 and each SD-008 can independently operate two motors so up to eight sets of points can be controlled by one SD-001 and four SD-008 units.

For more detailed information click here.

For a downloadable pdf data sheet (93 kb)

click here.

$21.20

SD-009

Servo Motor Slave Module

The SD-009 slave module is used in conjunction with an SD-001 central control unit for operating points and semaphore signals fitted with a servo motor.

It has two outputs to drive two points or signals. The stroke is easily ajusted to get the right movement of the points or signal arm.

One SD-001 and four SD-009 modules can operate eight sets of points or eight signals.

For more detailed information click here.

For a downloadable pdf data sheet (34 kb) click here.

$24.60

All prices are in Australian dollars and include GST

Packing and delivery charged at cost

Payment when using the shopping cart will be via PayPal.

Direct deposit can be arranged for Australian customers - email your enquiry to us: The Computer Crew

Trade enquiries welcome

Top   Home Page   Back

If you are using Internet Explorer and do not have javascript enabled the Back button may not work. You can either enable javascript or use the browser Back button to return to the previous page.